For sales and further information, please call: +41 (0) 33 676 76 76
Used winch W-90 HY 194 kW
Description
- DEUTZ turbodiesel engine TCD 2013 L06 2V 6 cyl. / 194 kW (263 hp) 2,100 rpm.
- Water-cooled and charge air-cooled
- el. starter
- electronic control with a large color display
- Hydrostatic drive with A4VG 125 REXROTH hydraulic pump / 6VM 200 motor
- continuously adjustable forwards and backwards, with additional automatic control of the pulling force and speed according to the motor power
- 7 gear variants for the pulling force and speed are available
- max. pulling force for version 1 G: 5,633 to 9,015 kg
- max. speed for version 1 G: 5.30 to 8.48 m/s (unloaded)
- Wind vane shaft
- Internal drum brake
- Cable drum ø 484 mm for a cable capacity of 1,390 m / cable ø 16 mm
- Gear wheel and pinion, wide variant (W-150)
- Steel skids, wide
- Drive group mounted on the flying frame for quick dismantling and helicopter transport
- Total weight of the cable winch without cable 2,950 kg (filled / without air brake)
- Drip-feed oiler on the side wall
- 1 flexible exhaust extension
- 1 tool box for the operation and maintenance of the machine
- Operating instructions and spare parts list
Technical data
| Factory No. | 5050 |
|---|---|
| Condition | very good, complete overhaul including re-painting |
| Notes | Complete overhaul/inspection of the hydraulics at Rexroth and the motor at Deutz, Emissions level EU 3A |
Used winch W-30
Description
- MWM Diesel engine D 328-3, 3 cylinder 31 kW / 42 hp / 2500 rpm, 6 speed reversible transmission, air brake Venus with protective grid
- Max. pulling force: 5 t (empty drum) / 3.6 t (full drum)
- Speed 0.65 – 5.9 m/s
- Cable support (traction cable): ø 11 mm / 1338 m
- Drum diameter 474 mm
Inclusive:
- 1 pc Turbo coupling type ZQ 40
- 1 pc Distance and air brake tachometers
- 1 pc Drip oiler on side wall
- 1 pc flexible exhaust extension
- 1 pc Toolbox for operation and maintenance
- 1 pc Operating instructions and spare parts list
Technical data
| Factory No. | 2389 |
|---|---|
| Condition | in good condition |
| Notes | Total revision 2022, including repainting of all parts individually |
Used winch W-10, wide version
Description
- Electric motor 3X400V 50Hz 7.5 kW
- Hydrostatic transmission, continuously adjustable forwards and backwards
- Variable displacement pump Rexroth A10VG18EP1D1
- Rexroth pump mounted on the electric motor
- Hydraulic motor with integrated multi-disk brake
- Air brake
- Pulling force 1,800 / 1,169 kg
- Speed 0.51 / 0.78 m/sec (HY motor type 160)
- Double-disk brake on the drum
- Cable drum ø 220 mm, for a cable capacity of 1,250 m / cable ø 6 mm
- Weight without cable approx. 440 kg
- Tool box for the operation and maintenance of the machine
- Operating instructions and spare parts list
Technical data
| Factory No. | 46.116 |
|---|---|
| Condition | very good, almost as new |
| Notes | Total overhaul and new chassis, including re-painting in 2018, used only once after that |