For sales and further information, please call: +41 (0) 33 676 76 76

Used carriage HY-2

Technical data

Factory No. 110.011
Year of manufacture 2005
Condition very good, complete overhaul including re-painting
Load capacity 3t

Description

Skyline cable clamp ø .. mm, (+/- 1 mm) as selected by the customer ø 18/20/22/24/26/28/30/32 mm mainline
cable clamp ø 7-11 or 11-13 mm (as selected by the customer)
Skyline cable roller for cable ø 18-32 mm (as selected by the customer)

Radio control and radio receiver built into the carriage
Skyline cable and mainline cable clamping via radio signal, when the load is lowered, the carriage can be moved in any direction after clamping of the mainline cable, with an electronic timer for fully automatic clamping on the skyline cable when stationary, programmable trigger time, the electronic timer remains active even if there is interference in the radio transmission (conventional clamping with time release), protected against jamming at full speed (programmable speed), automatic emergency braking in the event of overspeed (programmable speed), existing handheld radios of the type ICOM IC-F34GS and Motorola GP 340 VHF can be adapted as control units. Other radio devices on request. Programmable mainline cable break protection, failure protection, operating tools, 230 V charger with a carriage adapter, operating instructions / safety regulations, spare parts list, including choker spindle

Optionally available:
Motorola GP 340 (used) for speaking as well as programmed and adjusted to control the carriage, incl. desktop charger and leather case with 3-point belt

Used carriage HY-4F

Technical Data

Factory No. 131.057
Year of manufacture 2002
Condition very good, overhauled
Load capacity 4t

Description

with radio control without mainline cable clamp
Skyline cable clamp ø (+/- 1 mm) as selected by the customer 18/20/22/24/26/28/30/35/34/36 mm
Skyline cable rollers ø as selected by the customer 20/24/28/32/36 mm
with an electronic timer for fully automatic clamping on the skyline cable when stationary, freely adjustable time release, with normal pendulum for locking the hook (without mainline cable clamping), cable safety break and fail-safe

Included:

  • Radio receiver (built into the carriage)
  • Choker hook
  • 2 pcs. 10ND-3/2D battery, item No. 131.1060
  • 1 pc. charger, item No. 5821LG10-12Z/2.8-7AH
  • 1 pc. operating manual
  • 1 pc. spare parts list
  • 1 pc. tool case for operating and maintaining the carriage

 

Optionally available:
Motorola GP 340 (used) for speaking as well as programmed and adjusted to control the carriage, incl. desktop charger and leather case with 3-point belt

Used carriage HY-4FZ

Technical Data

Factory No. 131.085
Year of manufacture 2006
Condition very good, complete overhaul including re-painting
Load capacity 4t

Description

with radio control and mainline cable clamp
Skyline cable clamps ø (+/- 1 mm) as selected by the customer 18/20/22/24/26/28/30/32/34/36 mm
Mainline cable clamps ø (+/- 1 mm) as selected by the customer 10/11/12/13/14 mm (requires a strengthened/compacted mainline cable or a mainline cable with a steel core)
skyline cable rollers ø as selected by the customer 20/24/28/32/36 mm

with an electronic timer for fully automatic clamping on the skyline cable when stationary, freely adjustable time release, with mainline cable break protection, failure protection and mainline cable clamp pendulum for moving with a lowered load.

Included:

  • Radio receiver (built into the carriage)
  • Choker hook
  • 2 pcs. 10ND-3/2D battery, item No. 131.1060
  • 1 pc. charger, item No. 5821LG10-12Z/2.8-7AH
  • 1 pc. operating manual
  • 1 pc. spare parts list
  • 1 pc. tool case for operating and maintaining the carriage

 

Optionally available:
Motorola GP 340 (used) for speaking as well as programmed and adjusted to control the carriage, incl. desktop charger and leather case with 3-point belt

Used trailing carriage HY-3N

Technical Data

Factory No. 131.1500.006
Year of manufacture 2008
Condition very good, complete overhaul including re-painting
Load capacity 4t (together with carriage and transport bar 5t)
Notes Skyline cable rollers ø .. mm (as selected by the customer ø 20/24/28/32/36)

Description

The trailing carriage with a transport beam is used primarily in the construction industry for lifting, transporting, lowering and laying long heavy parts, such as pressure pipes and gas lines, or for transporting concrete and gravel.
(The beam provides greater safety due to the two pull points and rotation of the load is prevented)
With failover protection and normal pendulum

Used carriage HY-7F

Technical data

Factory No. 121.002
Year of manufacture 2008
Condition very good, overhauled
Load capacity 7t

Description

Skyline cable rollers as selected by the customer ø 24 – 45 mm, skyline cable clamps (ø +/- 1 mm) (as selected by the customer ø 24 – 45 mm), with radio control or a timer for fully automatic clamping on the skyline cable when stationary, freely adjustable time release, mainline cable break protection, fail-safe, standard pendulum, tool box for operating and maintaining the carriage, operating instructions, spare parts list, without hoisting hook.

Used trailing carriage HY-7N

photos-follow

Technical data

Factory No. 121.1500.0
Condition very good, overhauled
Load capacity 7t (together with carriage and tranpsort bar until 10 t)
Notes Skyline cable rollers ø .. mm (as selected by the customer ø 24-45 mm)

Description

The trailing carriage with a transport beam is used primarily in the construction industry for lifting, transporting, lowering and laying long heavy parts, such as pressure pipes and gas lines, or for transporting concrete and gravel.
(The beam provides greater safety due to the two pull points and rotation of the load is prevented)
With failover protection and normal pendulum

Used carriage 2.5t

photos-follow

Technical data

Factory No. 10.415
Year of manufacture 1988
Condition very good, complete overhaul including re-painting
Load capacity 2.5t

Description

Skyline cable clamps ø… as selected by the customer ø 16/18/20/22/24/26/28/30/32/34/36 mm
Skyline cable rollers ø .. mm (+/- 1 mm) as selected by the customer ø 20/24/28/32/36 mm
with a timer for fully automatic clamping on the skyline cable when stationary, freely adjustable time release

with mainline cable break protection
with failover protection
standard pendulum
with hoisting hook or choker hook
Weight 206 kg

with tool box for operating and maintaining the carriage, operating instructions, spare parts list

Used carriage 5t

photos-follow

Technical data

Factory No. 15.063
Year of manufacture 1989
Condition very good, complete overhaul including re-painting
Load capacitry 5t

Description

Skyline cable clamps ø… as selected by the customer ø 24/26/28/30/32/34/36/38/40/42 mm
Skyline cable rollers ø .. mm (+/- 1 mm) as selected by the customer
with a timer for fully automatic clamping on the skyline cable when stationary, freely adjustable time release

with mainline cable break protection
with failover protection
standard pendulum
with hoisting hook or choker hook
Weight 206 kg

with tool box for operating and maintaining the carriage, operating instructions, spare parts list

Used Unimat attachments for carriages, 2.5 and 5 t

unimat-vorne-2

Various Unimat attachments in stock
Condition: very good, overhauled
Load capacity 2.5 and 5 t

For attachment to 2.5t or 5t carriages
For circulation operation in flat terrain

Additional UNIMAT equipment for Wyssen cable cranes, independent of the terrain

UNIMAT is an additional system for standard automatic carriages and consists of devices (blue) that are attached to the left and right sides of the carriage. UNIMAT works with an endless mainline cable and enables transportation horizontally and on varying slopes.

Special benefits of UNIMAT:

  • UNIMAT is easy to install and uninstall on all standard automatic carriages with a load capacity of 2.5 tons and can be driven with our standard motor sledges.
  • When a load is lifted vertically, the pulling force on the circulating cable is only 1/3 of the load. The speed ratio between the circulating cable and the hoisting cable is constant (1:3) and does not change during lifting and lowering.
  • The lifting wheel only has one cable layer and this prevents the cable from cutting in under load and from getting stuck when it is wound down without a load.
  • The capacity of the hoisting cable storage drum normally allows for a load to be lifted up to 170 m and can be increased in specific cases.
  • UNIMAT is a very powerful system and can be used for long distances and over supports.
  • The lifting wheel with planetary gear is driven by the revolving cable looped around the drive wheel. The hoisting cable is wound onto/via the storage drum after being wrapped around the lifting wheel with a low input tension. The other end of the hoisting cable is attached to the load hook. The hoisting cable is not in the cable line.
  • The control mechanism is a special design aimed at protecting the cable on the drive wheels.
KONTAKTIEREN SIE UNS

Schreiben Sie hier eine Nachricht. Wir werden uns so schnell wie möglich bei Ihnen melden.

Start typing and press Enter to search